Rex Chain Cleaner 500 ml, chain cleaner

ACTIVE SOLVENT USE AS IS OR MIX WITH WATER

The surfactants used in Rex Chain Cleaner enhance the cleaning power of the low aromatic hydrocarbon mixture, and allow it to temporarily mix with water. Rex Chain Cleaner removes even the most stubborn oil and grease residues. Rex's red detergent for the drivetrain, green Bicycle Wash for everything else!

PH-NEUTRAL SAFE FOR ANODISED ALUMINUM AND CARBON FIBER

When researching the raw materials for Detergent, we discovered that many of the detergents preferred by cyclists are harmful to bike components. Strongly alkaline detergents cause corrosion in aluminum parts and take away the shine of anodized parts. Rex Chain Cleaner has been proven to be completely safe in long-term dissolution tests. It also does not leave a film on brake discs that reduces braking performance.

MIXING RATIO WITH OR WITHOUT WATER 1 PART CHAIN ​​CLEANER, 2 PARTS WATER

Active solvent: Mix with water in the chain cleaner for a more effective cleaning effect. Absorb the dirty detergent from the chain cleaner onto rags or paper, do not pour it down the drain. Finally, rinse the drivetrain with water.

Usage tips

• Cleaning the gear box: Spray the gear box as is, brush off the dirt with an old dish brush, for example, and finally rinse with water.
• Deep cleaning of the chain: Use in a chain cleaner raw or diluted with water. Do a final rinse with the chain cleaner with just water, dry the chain and lubricate.
• Do not pour Rex Chain Cleaner down the drain. Absorb the dirty liquid from the chain cleaner onto paper or cloth.
• Avoid getting the substance on the brake pads. It may be absorbed into them and reduce braking performance.

Manufacturer's website: Rex Chain Cleaner 500 ml